Application:
This is amedium-sized dual-colorrotary pad printingmachine, the biggest featureof thismodel is the continuouscirculation of doublecolor overprinter, rotary disk can print a product with onecaserotation,rotary discadopts Japanese high-precision CNC processing,highspeed, highaccuracy, stableperformance. It is more complex to operate thantheshuttleprinter. Themaximumprinting speed is 1500 times/hour and themaximumprinting area is60*120MM.Suitable for printing graphiclogo onelectronicproducts, plasticcases, hardware products, stationery,gifts, toys.
Parameters:
1.Single chip IC compiling actionprogram, a variety of printing modes
2.Automatic four-digit counter tocount the number of printing
3.All cast aluminum body, withmetal baking paint on the surface
4.Position of table, rubber headand oil pan can be adjusted by X.Y.Z axis
5.The pressure of ink absorptionand rubber head of printing can be adjustedindependently
6.Oil scraping travel can beadjusted
7.Automatic sliding of uniformink before and after to prevent ink localsolidification
8.The speed of all cylinders isindependently adjusted by rotating
9.Adopt original Japanese SMC andTaiwan MINDMAN pneumatic components
10.Calibration marks areavailable for adjusting positions
11.Do not drop glue head when nocompressed air enters
12.The whole machine runs fast,smoothly and quietly
13.Automatic cold air system
14.Action mode selection:automatic | semi-automatic | manual | self-programming
15.Start mode: panel | footswitch
16.Positioning method of rotarytable: pneumatic bolt
17.Rotary drive mode: pneumatic
Workingmode of scraper: pneumaticmechanical valve drives the cylinder up and down
19.Scraper pressure control:constant pressure of pressure regulating valve
20.Back and forth travel: 160MM
21.Up and down stroke: 75MM
22.Maximum product appearance size:length 200 * width 90-100
23.Maximum printing area: 60*120MM
24.Oil pan center distance: 127MM
25.Overprinter accuracy <0.05MM
26.Printing station: 8
27.Clamping device fixation:t-slot table, screw fixation
28.Selection of clampingmaterial: atomic ash | aluminum | bakelite | plastic |steel
29.Glue head fixation: wood screwlocking
The machine model
SKY-2Y
Steel plate size
100*150mm
The printing area
60*60MMmm
Printing speed
1500pcs/h
equipment size
920x680x1380mm
equipment weight
130kg
Gas pressure
5 bar
power
220V 50Hz 60W
在線客服<<